To capture the photos

1Play back the scene from which you want to capture the photo.

2 Pause the playback at the point you want to capture.

3Press jfully.

To capture a photo sequence, hold jpressed down. The scene will be played back by frames and each frame captured as a separate photo.

4 Touch [B] to return to the index screen.

IMPORTANT

•When capturing photos on an Eye-Fi card in memory card slot Y, pho- tos will be uploaded automatically if you are within the range of a config- ured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0146).

NOTES

•The data code of the photos will reflect the date and time of recording of the original scene.

•Photos captured from a scene with a lot of fast movement may be blurred.

•Photos will be recorded on the memory selected for recording photos.

•[BPhoto Sequence]:

-Up to 100 photos can be captured at a time.

-The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene).

-Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a frame rate of [EPF24] or [z24F]).

Dividing Scenes

You can divide scenes (original scenes only) in order to leave out the best parts and later cut out the rest.

Operating modes:

1 Open the [Original] index screen.

104 Š Video