Mem. Card Unable to recognize the data
-The memory card contains scenes recorded in a different television system (PAL or SECAM). Play back the recordings in the memory card with the device originally used to record them.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover (039).
Memory card is full
-The memory card is full. Delete some recordings (059, 108) to free some space or replace the memory card.
Memory card is
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.
- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.
No faces were detected in this scene
- The camcorder did not detect any faces in the scene displayed. Be sure to turn on face detection (069) when shooting movies.
No memory card
- Insert a compatible memory card into the camcorder (039).
No photos
- There are no photos to play back. Have fun taking some photos (044, 61).
No scenes
-There are no scenes in the memory selected. Have fun shooting some video (044).
-After selecting [Scenes with Faces] when narrowing down the scenes shown in the index screen: No scenes contain people’s faces or no scenes were recorded using the face detec- tion function.
Not enough available space
-Delete some recordings on the memory card (059, 108) or select the [3Mbps] bit rate for the conversion to SD.
Number of scenes already at maximum
-The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes (059) to free some space.
-The playlist can contain a maximum of 999 scenes.
182 Additional Information