Connecting to the Computer and Uploading your Videos

If you are connecting the camcorder to the computer immediately after the conversion described in the previous section, start this procedure from step 3 below. Otherwise, start this procedure from the beginning.

1 Power the camcorder using the compact power adapter.

2Open the [For Web Upload] index screen on memory card Y.

[b] 87 8[SD Scenes] 8[For Web (MPEG-2)]

3Connect the camcorder to the computer using the supplied USB cable.

Connection D. Refer to Connection Diagrams (0130).

4Computer: Depending on the software you chose to install, Transfer Utility or VideoBrowser will start up automatically.

•Transfer Utility: Click [Web Upload] to upload your SD movies to the Web. For details about using the software, click [Help] to open the Software Guide (PDF file).

•VideoBrowser: Click in the menu panel to upload your SD movies to the Web. For details about using the software, click to open the Software Guide (PDF file).

IMPORTANT

•While the camcorder is connected to the computer, do not open the double memory card slot cover and do not remove the memory cards.

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the double memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the compact power adapter or turn off the camcorder or the computer.

External Connections Š 145