Problem

 

 

 

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pressing START/STOP will not start

Set the camcorder to

 

 

mode.

35

recording.

 

 

 

 

 

 

 

 

Load a recommended disc.

 

 

7

 

 

 

 

 

 

 

 

 

 

 

The disc is full (“

 

END” appears on the screen). Delete some recordings

43

 

 

 

(DVD-RW in HD quality, or SD quality (VR mode)) to free some space or

 

 

 

replace the disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The camcorder has exceeded its operational temperature. Turn off the

 

camcorder and let it cool down before resuming use.

 

 

 

 

 

 

 

 

 

 

Remove the disc protection.

 

 

66

 

 

 

 

 

 

 

Unfinalize the disc (DVD-RW in HD quality, or SD quality (VIDEO mode)).

71

 

 

 

 

 

 

Even after stopping recording, the

The scene is being recorded on the disc. This is not a malfunction.

35

DISC access indicator does not go off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The point where START/STOP was

There is a slight interval between pressing START/STOP and the actual start

pressed does not match the

of recording on the disc. This is not a malfunction.

 

 

beginning/end of the recording.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The recording suddenly stops shortly

The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the

111

after starting recording.

problem persists replace the disc.

 

 

 

 

 

 

 

 

 

The camcorder has exceeded its operational temperature. Turn off the

 

camcorder and let it cool down before resuming use.

 

 

 

 

 

 

 

 

Camcorder will not focus.

Autofocus does not work on the subject. Focus manually.

59

 

 

 

 

 

 

 

Adjust the viewfinder with the dioptric adjustment lever.

36

 

 

 

 

 

 

 

Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use

113

 

tissue paper to clean the lens.

 

 

 

 

 

 

 

 

 

 

Sound is distorted.

When recording near loud sounds (such as fireworks or concerts), sound

 

may become distorted. This is not a malfunction.

 

 

 

 

 

 

 

 

Viewfinder picture is blurred.

Adjust the viewfinder with the dioptric adjustment lever.

36

 

 

 

 

 

 

 

 

 

Playback/Editing

Problem

 

Solution

 

 

 

 

Pressing the playback button does

Load a disc.

 

32

not start playback.

 

 

 

 

 

 

Set the camcorder to

 

 

mode.

41

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not insert into the camcorder discs that were initialized, recorded or

 

edited using another DVD device.

 

 

 

 

 

 

 

 

 

 

If using a single-sided disc, check that the disc is inserted with the label

32

 

side facing up.

 

 

 

 

 

 

 

 

 

 

The camcorder has exceeded its operational temperature. Turn off the

 

camcorder and let it cool down before resuming use.

 

 

 

 

 

 

 

 

• During playback there is video

The disc is dirty. Clean the disc with a soft lens-cleaning cloth.

111

noise and the sound is distorted.

 

 

 

 

 

 

Do not insert into the camcorder discs that were initialized, recorded or

• The disc cannot be read.

edited using another DVD device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

103