finger, and the START/STOP button with your thumb.

Using the Wireless Controller

First, insert the supplied lithium button battery CR2025 into the wireless controller.

Tab

1Press the tab in the direction of the arrow and pull out the battery holder.2Place the lithium button battery with the + side facing up.3Insert the battery holder.

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

NOTES

The wireless controller may not work properly when the remote sensor is

situated under strong light sources or direct sunlight.

If the wireless controller does not work, check that [WL.REMOTE] is not set to

[ OFF ] ( 52). Otherwise, replace the battery.

When you mount the camcorder on a tripod

Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of the light by

the lens). Do not use tripods with fastening screws longer than 5.5 mm (0.2 in.).

Doing so may damage the camcorder.

25