Photos
Refer to this chapter for details on shooting photos – from capturing and playing back images to printing them.
Basic Recording
Taking Photos
Before using a memory card for the first time, be sure to initialize it with
this camcorder (
84).
( 
26)
1Move the
switch to ON to set the camcorder in CAMERA mode.
The red CAMERA indicator will turn on.
2Move the
/
switch to 
(Still images).
3 Press PHOTO halfway.
•Once the focus is automatically
adjusted, 
will turn green and one or more AF frames will appear.
•When you press PHOTO on the wireless controller, the still image is recorded immediately.
4 Press PHOTO fully.
The CARD access indicator will flash as the still image is being recorded.
IMPORTANT
Avoid the following actions while the card
access display ( 
) appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.
-Do not subject the camcorder to vibrations or strong impacts.
-Do not open the memory card slot cover and do not remove the memory card.
-Do not disconnect the power source or turn off the camcorder.
-Do not change the position of the
/
switch or the operating mode.
NOTES
•If the subject is not suitable for
autofocus, 
turns yellow. Adjust the
focus manually (
59).
•When the subject is too bright, “OVEREXP.” starts flashing. In such case, use the optional
72