4
Grasp the Belt, insert it between the Belt Stopper,
and affix the Belt Stopper with a hex screw at the po-
sition indicated.
Important
Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to at-
tach the Belt Stopper may damage the printer.
Do not touch the Linear Scale (a), Carriage Shaft
(b), or Fixed Blade (c). This may stain your hands
and damage the printer.
5
Close the Top Cover.
iPF8400SE
Preparing to Transfer the Printer
User's Guide
Maintenance and Consumables Other Maintenance
573