Canon LBP-2460 manual Remove fill plug and fill with toner

8

Notes

Photo 33

Photo 34

Photo 35

Photo 36

Photo 37

WX Technical Instructions

Step 33

Remove fill plug and fill with toner.

(See Photo 33)

Step 34

Use compressed air or a vacuum and clean the toner hopper seal channel end foam on the back of the mag roller sec- tion. Wipe off the back of the mag roller section.

(See Photo 34)

NOTE: If these foam pads are damaged, they need to be replaced.

Step 35

These foam strips stop the cartridge from leaking after it has been split. The foam strips are applied right across the seal channel end foam.

(See Photo 35)

Step 36

Fold the seal back across the toner hop- per. Now re-join the mag roller section and the toner hopper section.

(See Photo 36)

NOTE: The posts on the mag roller section needs to fit back into the holes on the toner hopper section.

Step 37

Using the toner hopper clips, clip the two sections together.

(See Photo 37)