11
PartNamesandFunctions
(MIC)-
RearTerminal② ③①⑥⑤⑧④
④ VIDEOIN
Connect the composite video output signal
to this jack (p.18).
② COMPUTERIN1/S-VIDEOIN/
COMPONENTIN
Connect output signal from a computer,
component video output, RGB scart 21-
pin video output or S-VIDEO output to this
terminal (pp.17-19).
⑥ AUDIOOUT(VARIABLE)
Connect an external audio amplifier to this
jack (pp.17-19).
This terminal outputs sound from AUDIO IN
terminal.
Never plug headphones into this jack.
⑤ LANConnectionTerminal
Connect the LAN cable (refer to the user’s
manual of “Network Set-up and Operation”).
① CONTROLPORT
When the projector is controlled by a
computer, connect to this jack with serial
control cable.
③ COMPUTERIN2/MONITOROUT
– Connect analog RGB output signal from a
computer to this terminal (p.17).
– This terminal can be used to output the
incoming analog RGB and COMPONENT
signal from COMPUTER IN 1 /S-VIDEO
IN /COMPONENT IN terminal to the other
monitor (pp.17,19).
⑦
⑦ AUDIOIN(PC/MIC)
Connect the audio output signal from
computer or video equipment connected to
② and ③ to this jack. Or connect the MIC to
this jack (pp.17-19).
⑧ AUDIOIN(L/R)L/R)
Connect the audio output signal from video
equipment connected to ④ to this jack. For
a mono audio signal (a single audio jack),
connect it to L(MONO) jack (p.18).
Note: When using AUDIO IN(PC/MIC)
terminal as MIC input, these terminals can
be used for PC audio input.