ComputerInput
37
ComputerInput
AspectSetting(forLV-7290,LV-7295,LV-7390)
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
Aspect and then press the Point ► or the OK
button.
Use the Point ▲▼ buttons select the desired
item and then press the OK button .
This projector has the picture screen resize function, which enables you to customize the image size.

AspectMenu

Provide the image to fit the screen size.

Normal

True

Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1024 x 768), the projector enters to the
panning mode automatically. Use the Point ▲▼◄►
buttons to pan the image. When adjusted, the arrows
will turn red. When reached to the correction limits,
the arrows will disappear.

Full

Provide the full screen image.

Note:

• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to
the projector.
• The image data in other than 1024 x 768
is modified to fit the screen size in initial
mode.
• Tru e and Digital zoom +/– are disabled
and cannot be displayed when 480i, 575i,
480p 575p, 720p,1035i or 1080i is selected
in the PC System Menu (p. 31).
• When True is selected in the Screen menu,
Digitalzoom+/- can not be selected.
1
2

Custom

Provide the last stored aspect screen image.

16:9

Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually with
this function. Press the Point ► button at Custom
adj. and the Custom adjustment menu is displayed
on the screen, you can use the Point ▲▼ buttons to
choose the item you want to adjust.
ScaleH/V .......... Adjust the Horizontal/Vertical
screen scale.
H&V ................... When set to On, the aspect
ratio is fixed. The ScaleV
appears dimmed and becomes
unavailable. Adjust ScaleH, then
the screen scale is automatically
modified based on the aspect
ratio.
PositionH/V ..... Adjust the Horizontal/Vertical
screen position.
Common ........... Save the adjusted scale or
position to all the inputs. Press the
OK button at Common to display
a confirmation box. To save the
scale or position, press the OK
button at Yes. When Custom
is selected, the saved scale or
position is used.
Reset ................. Reset the all adjusted values.
Press the OK button at Reset to
display a confirmation box. To
reset, press the OK button at Yes.
Customadj.
Note:
• When no signal is detected, Normal is set
automatically .
• The adjustable range for ScaleH/V and
PositionH/V is limited depending on the
input signal.

Zoom

Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
Customadj.