42
VIDEOInput
Choose COMPUTER1(COMPONENT) or COMPUTER1(SCART) by pressing the COMPONENT or the
COMPUTER 1 button on the remote control unit.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1

InputMenu

2Use the Point ▲▼ buttons to select COMPUTER 1
and then press the Point ► button.

InputSourceSelection(COMPONENT,SCART)

When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a COMPONENT-VGA Cable, select
COMPONENT.
COMPONENT
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with a
Scart-VGA Cable, select SCART.
SCART
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the OK button.
Note:
When the Auto input function is set to On 1
or On 2, the input signal will be searched
automatically (p.52).
COMPUTER1button
Remotecontrolunit
3Use the Point ▲▼ buttons to select COMPONENT
or SCART and then press the OK button.
COMPUTER1(ANALOGPC)
COMPUTER1(SCART)
COMPONENTbutton
COMPUTER1(COMPONENT)
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select COMPONENTor
SCART.