Setting
53
Setting
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen
displays. Use this function
when you want to project
images after the lamp
becomes bright enough. The
factory default setting is in this
option.
CountdownOff....... Show the input image instead
of the countdown when
turning on the projector. Use
this function when you want to
project the image as early as
possible even when the lamp
is not bright enough.
Off ........................... Hide the On-Screen Displays
except;
● On-Screen Menu.
● Poweroff? (p. 23)
● P-Timer display. (p. 29)
● Nosignal for Power
management (p. 56)
● Pleasewait...
● Arrows for the True function
in the Screen Menu. (p. 39)
Background
Select the background screen for when no input
signal is detected. Press the Point ▲▼ buttons to
switch between each option.
blue........Project a blue background.
User
........
Project an image captured in the Logo
setting.
Black
......
Project a black background.
DisplayLogo(LogoandLogoPINcodelocksettings)Logoselect
This function allows you to customize the screen logo
with Logoselect, Capture, LogoPINcodelock and
LogoPINcodechange functions.
Note:
When On is selected in the Logo PIN code lock function, Logoselect and Capture functions cannot be selected.Logoselect
This function decides on the starting-up display from
among following options.
User......... Show the image you captured.
Default .... Show the factory-set logo.
Off ........... Show the countdown display only.