BasicOperation
29
BasicOperation
BLANKbutton
Press the P-TIMER button on the remote control unit
to operate the Count up/Count down function. Refer
to p.57 for detail of Setting for the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-
TIMER button.
P-TIMERbutton
Press the IMAGE button on the remote control unit
to select a desired image mode of the screen. See
pages 35, 44 for details.
IMAGEbutton Blankdisappears after 4 seconds.
Note:
See the previous page for the description of
other buttons.
Select the screen size (See pages 37-40, 47-50 for
details).
ASPECTbutton
black out→ the captured image → normal →• • • • •
Press the BLANK button on the remote control unit to
black out the image. To restore to normal, press the
BLANK button again or press any button. When the
projected image is captured and is set as User in the
Logo selection (p. 53), the screen changes each time
you press the BLANK button as follows.
Note:
When use the MUTE button to release the
Blank function, the mute function can not
be operated at the same time.
IMAGEbutton
BLANKbutton
P-TIMERbutton
ASPECTbutton
Remotecontrolunit
BLANK
P-Timer