32
ComputerInput
Auto PC Adjustment function is provided to automatically adjust Finesync, Totaldots, Horizontalposition and
Vertical position to conform to your computer.
PCadjustMenu

AutoPCAdjustment

Tostoreadjustmentparameters
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector. Once the
parameters are stored, the setting can be done just
by selecting a Mode(1–10) in the PC System Menu
(p.31). See also “Store” on page 34.
Note:
• Finesync, Totaldots, Horizontalposition
and Vertical position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not
provided properly with this operation, manual
adjustments are required (pp. 33-34).
• The Auto PC Adjustment cannot be operated
when 480i, 575i, 480p, 575p, 720p, 1035i or
1080i is selected in the PC System Menu
(p. 31).
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select PC
adjust and then press the Point ► or the OK
button.
1
2Use the Point ▲▼ buttons to select AutoPC and
then press the OK button.
AutoPC
Menu Operation
Use Point ▲▼ buttons to select Auto
PC and press the OK button.
Pleasewait... appears while the Auto
PC adjustment is in process.