30
Choose either COMPUTER1(ANALOGPC)or COMPUTER2(ANALOGPC) by pressing the COMPUTER 1 or
COMPUTER 2 button on the remote control unit.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1InputMenu
2

3

Note:
When the Auto input function is set to On 1
or On 2 in the Auto setup function, the input
signal will be searched automatically (p.52).
COMPUTER 1
Remotecontrolunit
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the OK button.
Use the Point ▲▼ buttons to select COMPUTER 1.
When COMPUTER 1 is selected, press the Point
► button to access the submenu items. Use the
Point ▲▼ buttons to select the ANALOGPC
input source and then press the OK button.
COMPUTER1(SCART)

InputSourceSelection(ANALOGPC:COMPUTER1/COMPUTER2)

COMPUTER2(ANALOGPC)
Direct Operation
Menu Operation
ComputerInput

OR

Use the Point ▲▼ buttons to select COMPUTER 2
and then press the OK button.
COMPUTER1button
COMPUTER2button
COMPUTER1(ANALOGPC)