ComputerInput
33
ComputerInput
PCadjustMenu
ManualPCAdjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the
setting for a specific computer.
1
2
Use the Point ◄► buttons to adjust the value,
eliminating a flicker from the image displayed (from
0 to 31).
Finesync
Use the Point ◄► buttons to adjust the number of
total dots in one horizontal period to match your PC
image.
Totaldots
Use the Point ◄► buttons to adjust the horizontal
picture position.
Horizontalposition
Use the Point ◄► buttons to adjust the vertical
picture position.
Verticalposition
Use the Point ◄► buttons to adjust the clamp level.
When the image has dark bars, try this adjustment.
Clamp
Press the MENU button to display the On-
Screen Menu. Use the Point ▲▼ buttons to
select PCadjust and then press the Point ► or
the OK button.
Use the Point ▲▼ buttons to select the desired
item and then press the OK button to display
the adjustment dialog box. Use the Point ◄►
buttons to adjust the setting value.
Use the Point ◄► buttons to adjust the vertical area
displayed by this projector.
DisplayareaV
Use the Point ◄► buttons to adjust the horizontal
area displayed by this projector.
DisplayareaH
Press the OK button to show H-syncfreq. and V-
syncfreq.of the connected computer.
Currentmode