Image Settings

[Auto Tone]

Set to [ON] to automatically adjust the tone

 

of the image. You can apply this setting

 

when the preview image is displayed.

NOTE

This setting is available when [Color], [Color (Documents)] or [Grayscale] is selected in [Color Mode], and [Color Correction] is set to [Recommended] or [Color Matching] in the [Preferences] dialog box (see p. 2-40).

[Unsharp Mask] Set to [ON] to emphasize the outline of an image and make it sharper. It is effective for scanning photos etc., which have a soft

[Reduce Dust and Scratches]

NOTE

Reduces the dust and scratches on photos.

[None]:

No reduction of dust and scratches will be made.

[Low]:

Reduces only small dust and scratch marks.

[Medium]:

Normally this setting is recommended.

[High]:

Reduces large dust and scratch marks. This may remove delicate parts of the image.

focus.

NOTE

This setting is available when [Color], [Color (Documents)] or [Grayscale] is selected in [Color Mode].

This setting is available when [Color], [Color (Documents)] or [Grayscale] is selected in [Color Mode].

[Descreen]

Set to [ON] to reduce the distorted pattern

 

(moire) when scanning printed photographs

 

and pictures.

NOTE

–This setting is available when [Color], [Color (Documents)] or [Grayscale] is selected in [Color Mode].

–Even if [Descreen] is set to [ON], some moire effect may remain if [Unsharp Mask] is also set to [ON]. In this case, disable [Unsharp Mask].

–A change in this setting is reflected after [Scan] is clicked.

Table of Contents

 

Index

2-30