Scanned images look dirty.

QAre the scanning components of the machine clean?

AClean the platen glass, the platen glass cover and the ADF scanning area.

Q

Is the image size too small?

 

 

ASome applications do not display an image properly at small sizes. Try displaying the image at 100% magnification.

QDoes the monitor display color set at below 16 bits?

AIn [Display Properties], set the display colors to 16- bit color, 24-bit color or higher.

Scanned image is displayed at a larger (smaller) size on the computer screen.

Q

Is the resolution setting correct?

 

 

ADo one of the following:

–Enlarge or reduce the image display in the application. If you open the image in Paint or Imaging, it may display at a large size and you will not be able to reduce it.

–Change the resolution and scan again.

The image will be large if the resolution is high. It will be small if the resolution is low. (See “Determining Resolution,” on p. 2-42.)

Cannot scan highlighted marks.

Q

Is [Color Correction] set to [Color Matching] ?

 

 

AIn [Advanced Mode] in ScanGear MF, set [Color Correction] to [Color Matching]. (See “[Color Settings] Tab,” on p. 2-40.)