Canon MLT (F) 2.2Setting DWT ENHANCE. Tab

2.Edit Exposure Mode Settings

2.2Setting DWT ENHANCE. Tab

1Set the DWT Edge Enhancement effective

Touch [EDGE ENHANCE.] to display the parameters. The appearance of the button switches over between the highlight (in white outline characters against a colored back- ground) and normal display each time you touch the button. The parameters are available when the button is highlighted.

FREQUENCY

BASE Button

DENSITY

BASE Button

	DWT ENHANCE. Screen with Parameters
2	Set the EFFECT parameter
2	Touch the or button, and set the value within the range between 1 to 20.

The value on the left is the setting saved previously, and the value on the right is the current setting.

The value indicates the degree of edge enhancement.

Select a larger value for higher degree of enhancement, and select a smaller value for lower degree of enhancement.

NOTE: If the EFFECT parameter is set to an excessive value, artifacts may occur in the image, or the effective data of the exposure image may be damaged. Check the output of exposure image, and if the results of enhancement appear to be too strong, either set the parameter to a smaller value, or set the DWT Edge Enhancement not effective.

Continued on the following page >>

– 7 –