2.Edit Exposure Mode Settings
3 | Display the FREQUENCY BASE window |
Touch the FREQUENCY BASE button to open the window. |
|
|
| FREQUENCY BASE Window |
| The types of Frequency Bases are classified into two kinds, and are indicated with the | ||
| buttons in different colors respectively as follows: | ||
|
|
|
|
|
| Display of Button | Remarks |
|
|
|
|
|
|
|
|
|
|
| Enhances the signals smoothly ranging from the low frequency |
|
| Blue Bar Graph | area to the high frequency area. |
|
| The results of enhancement appear natural with smooth frequent | |
|
|
| |
|
|
| response characteristics. |
|
|
|
|
|
| Green Bar Graph | Enhances the structures in the specific frequency band stronger |
|
| than the structure in other frequency bands. | |
|
|
| |
|
|
|
|
| The bar graph in the each button shows the range of frequencies that enhancement | ||
| applies to. |
| |
| To enhance the mass structure, such as soft tissues, select the Frequency Base that | ||
| applies enhancement to the lower frequency. The range increases by including the lower | ||
| frequency in ascending order from A or a. To enhance the minute structure, such as bone | ||
| tissues, select the Frequency Base that limits enhancement to the lower frequency and | ||
| covers only the higher frequency. The range decreases by excluding the lower frequency | ||
| in descending order to A or a. | ||
4 | Set the FREQUENCY BASE parameter | ||
Touch the desired Frequency Base button. | |||
The parameter is set for the Frequency Base selected, and the FREQUENCY BASE window is closed.
– 8 –