3.QA Mode Settings

 

 

2

Select MLT (F) FREQUENCY

If MLT (F) FREQUENCY is not currently selected (in this case, the DWT ENHANCE.,

DWT DEP, and DWT NOISE R. tabs are not displayed), touch the Frequency Processing Mode button to open the window, then touch [MLT (F) FREQUECY].

Frequency

Processing

Mode

BUTTON

Frequency Processing Mode Window

When the Frequency Processing Mode button is not visible

If the Frequency Processing Mode button is not displayed on the screen, touch the button at the bottom part of the screen (CXDI System Software Version 5.1 or later

only).

3

4

Select the tab

Touch the desired tab from among three tabs: DWT ENHANCE., DWT DEP, DWT NOISE R.

Change the parameters

Set the parameters provided with the selected tab, referring to the corresponding descrip-

tions; 3.2 Changing DWT ENHANCE. Tab (→

P.17), 3.3 Changing DWT DEP Tab

(→ P.22), 3.4 Changing DWT Noise R. Tab (→

P.26).

Continued on the following page >>

– 15 –