3. QA Mode Settings

The examples used in this chapter are the screens of CXDI System Software version 6.3.

3.1 Procedures to Change Parameters

Image processing of the exposure images with CXDI is called QA (Quality Assurance) Process- ing, and can be performed by adjusting the parameters on the QA Mode screen to optimize the exposure image.

1

Display the QA Mode screen

Display the QA Mode screen by one of the following methods:

QA Mode Screen

To display the QA Mode screen automatically right after x-ray exposure

On the Exposure screen, touch the followings to display the DISPLAYING PARAME-

TER CHANGE/QA SCREEN DURING EXPOSURE screen:

[SYSTEM] > [SETUP MENU] > [SYSTEM SETUP] > [DISPLAYING PARAME-

TER CHANGE/QA SCREEN DURING EXPOSURE] Then set the QA Mode screen effective

To perform QA Processing right after x-ray exposure

Touch [QA] on the Preview screen.

To perform QA Processing after examination

Select the exposure image from the Study List, and display the selected image, then touch [QA].

Availability of Frequency Processing Mode

If your CXDI System Software is the version 5.0 or before, there is no need to select the frequency processing mode as described in the next step (step 2). Skip the step 2 and proceed to the step 3.

– 14 –