XPC Cannot Print To A Shared Printer

Cause

Action

The server (the computer to which

Turn ON the server.

the machine is connected) is not

 

turned ON.

 

 

 

The server is not set up for printer

Set up the server for printer sharing. (See Software Guide, located on

sharing.

your Setup CD-ROM)

 

 

The server is not set up to allow

Set up the server to allow your system access to the shared printer.

your system access to the shared

 

printer.

 

 

 

PC Problems Scanning

Cause

Action

The USB hub or repeater is defective.

If you can scan documents successfully after connecting the USB cable directly to the computer, the USB hub or repeater may be broken. Replace if necessary.

You cannot scan because the machine is connected to a USB hub.

Connect the USB cable directly to the computer without using a USB hub. To connect to the computer via a USB hub, overwrite the INI file by the following procedure. We recommend that you copy to another folder the files you open in 1., and save the files before overwriting them.

1.In Memo Pad or Text Editor, open the following files. z Windows 98/Me

Windows/System/CNCMP51.ini z Windows 2000

Winnt/system32/CNCMP51.ini z Windows XP

Windows/System32/CNCMP51.ini

 

2. Below the last line, add the following two lines, and save the files.

 

Be careful not to overwrite any other portion of the file.

 

[Scan]

 

ReadSize=16

 

 

After installing the MP Toolbox

After installing the software on the machine, if you install a

and MP Drivers, you installed a

TWAIN-compliant application, the TWAIN system files may not be

TWAIN-compliant application.

correctly overwritten, and thus images may not be scanned. Uninstall

 

the software from the machine, then reinstall it. (See page 67)

 

 

Chapter 11

Troubleshooting

101