XWhen The [Alarm] Lamp Flashes

If a paper jam occurs while printing, the [Alarm] lamp flashes. Check the cause of the error below and take corrective actions.

zIf a message appears:

1

2

Check the message appearing on the LCD.Follow the instructions and correct the error.

• For LCD messages, see page 107.

3Press [Set] to resume operation.The [Alarm] lamp will stop flashing.

If the error remains, turn OFF the machine and disconnect the power cord. Wait at least 15 seconds then reconnect the power cord and turn ON the machine.

zIf a message does not appear:

1

2

Turn OFF the machine and disconnect the power cord.Wait at least five seconds, reconnect the power cord and turn the power ON.

• If the problem has been resolved, the [Alarm] lamp will stop flashing.

zIf the [Alarm] lamp still flashes even after you have turned the power ON again:

Contact the Canon Customer Care Center.

106

Troubleshooting

Chapter 11