Scanning with CaptureOnTouch
Installing CaptureOnTouch
Do not connect the scanner to the computer before Installing CaptureOnTouch.
Insert the Setup disc into the computer’s
Connecting the Scanner to the Computer
ATurn ON the computer.
BSet the Auto Start switch on the scanner to OFF.
CConnect the scanner to the computer using the supplied USB cable. (Connect the power supply USB cable, if higher speed scanning is necessary.)
Auto Start | Set to OFF. |
OFF ON |
▼
Click [Typical Installation] in the setup menu, and follow the instructions on the screen to complete the installation.
USB
USB Cable | Power Supply USB Cable |
Notes on connection
Make sure to set the Auto Start switch to OFF before connecting the scanner to the computer. If the Auto Start switch is set to OFF after the scanner is connected to the computer, malfunctions may occur.
16