E Close the feeder cover. | Resetting the Counters |
|
Make sure to reset the scanner’s internal counters using the following procedure whenever you replace the feed roller and separation pad.
IMPORTANT
If you only use CaptureOnTouch Lite and have not installed CaptureOnTouch and the scanner driver on your computer, you cannot reset the counter using the following procedure. In this case, you can reset the counter from CaptureOnTouch Lite. Refer to the User Guide for details.
AStart Windows and log on as a user with administrator privileges.
BSet the Auto Start switch at the rear of the scanner to OFF.
CConnect the scanner to the computer.
DOpen the feed tray to turn the scanner ON.
EClick [Start], [All Programs], [Canon
The Canon imageFORMULA utility starts.
FSelect [Canon
24