AC Adapter (Not Supplied)

When using an AC adapter (not supplied) to power the unit, make sure to read the operating manual for the AC adapter.

Use only recommended AC adapters. In addition, do not use these AC adapters with devices other than the scanner.

Using the AC adapter, you can obtain better scanning speed than when using the USB cable by itself.

If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information.

Handling

WARNING

Never place alcohol, benzene, paint thinner, or other flammable substances near the scanner.

Do not cut, damage, or modify the USB cable or power supply USB cable. Do not place heavy objects on the cable, and do not pull or excessively bend the cable.

Never connect the USB cable or power supply USB cable when your hands are wet.

Do not knot or coil the USB cable or power supply USB cable, as this may result in a fire or electric shock. When connecting the cable, make sure that the power plug is securely and completely inserted into the power connector.

Use only the USB cable or power supply USB cable supplied with the scanner.

Do not attempt to dismantle the scanner or modify it in any way, as this is dangerous and may result in a fire or electric shock.

Do not use flammable aerosol spray products near the scanner.

When cleaning the scanner, turn the scanner OFF and disconnect the USB cable or power supply USB cable.

Clean the scanner using a slightly dampened cloth that has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substance.

If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the scanner, immediately turn the scanner OFF, and disconnect the USB cable or power supply USB cable. Then, contact your local authorized Canon dealer or service representative for further information.

Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately close the feed tray, turn the scanner OFF, and disconnect the USB cable or power supply USB cable. Then, contact your local authorized Canon dealer or service representative for further information.

Before moving the scanner, make sure to close the feed tray, turn the scanner OFF, and disconnect the USB cable or power supply USB cable.

CAUTION

Do not install the scanner on a surface that is unstable, tilted, or in an area subject to excessive vibrations. Doing so may cause the scanner to fall, resulting in personal injury or damage to the scanner.

Never place small objects, such as staples, paper clips, or jewelry on the scanner. These items may fall into the scanner and cause a fire or electric shock. If such objects ever fall inside the scanner, immediately close the feed tray, turn the scanner OFF, and disconnect the USB cable or power supply USB cable. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.

Do not locate the scanner in a humid or dusty location. Doing so may result in a fire or electric shock.

Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury.

5