Motorola WR850G Wireless Security Setup, Configure Your Basic Internet Settings, Installation

INSTALLATION SECTION 2

Wireless Security Setup

To setup the correct security protocols for your router:

1Click Control Panel > Device Security.

2In the Login User ID field, enter the desired User ID. For strong security, select an ID that contains multiple case-sensitive characters as well as numbers. It cannot be longer than 64 bytes.

3In the Login Password field, enter the desired Login Password. For strong security, select an ID that contains multiple case- sensitive characters as well as numbers and symbols like “_ + )”. It cannot be longer than 64 bytes.

4Re-enter the same Password.

5Click Apply.

6Once the settings have been accepted, click Restart and log back into the Configuration Utility using your new User ID and Password.

7Navigate to Wireless > Basic.

8Change the SSID to a user-friendly name and click Apply.

9Navigate to Wireless > Security.

10Select WPA-PSKfrom the ESS Authentication Mode options.

11Select AES from ESS Encryption Status options.

12Click Apply and click Restart again. Your wireless security configuration is now complete.

Configure Your Basic Internet Settings

The following settings illustrate how to configure your router for accessing the Internet. Detailed descriptions for using the web-based utility follow this section.

1Log into the router’s Configuration Utility. You are presented with the Internet > Basic screen.

2Starting at the Basic screen, select the Connection Mode your ISP has indicated you need to use. Based on which connection type you select, different areas become inaccessible, leaving only the appropriate fields to fill in the necessary information.

SECTION 2, INSTALLATION 2-17