Motorola WR850G manual Configuration, Section, Field, Description

CONFIGURATION SECTION 3

Field	Description
Firewall	Click to disable the Firewall. The default is
	enabled.
Multicast	Click to enable Multicast Pass-through. The
Pass-through	default is disabled.

To add a Packet Filter entry:

1Packet Filter Name: Enter a descriptive name.

2Filter Action: Select Allow or Deny. Allow: permits data that meets

the criteria selected. Deny: blocks the data that meets the selected criteria.

3Packet Direction: From the drop down box, select either Inbound or Outbound, based on whether you want to monitor incoming or outgoing packets.

4Packet Protocol: Select the type of protocol to monitor, TCP, UPD, ICMP, or ALL.

5Source IP Range: Enter the IP range.

6Source Port Begins and Ends: Enter the Port range.

7Destination IP Range: Enter the Destination IP range.

8Destination Port Begins and Ends: Enter the Destination Port range.

9Click Add to add the entry.

SECTION 3, CONFIGURATION 3-37