INSTALLATION | SECTION 2 |
|
|
9Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:
!There must be 4.0 mm (.16 inches) between the wall and the underside of the screw head.
!The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).
7.6 mm (.3 inches) maximum
10.5 mm (.4 inches) maximum
4.0 mm
10Remove the two plastic feet, nearest to the LED panel, from the bottom of the router to uncover the keyholes.
11Place the router so the keyholes are above the mounting screws.
12Slide the router down until it stops against the top of the keyhole opening.
13Follow the installation procedures for connecting and configuring the unit.
SECTION 2, INSTALLATION |
