Motorola WR850G manual Section, Configuration, Field or Button, Description

SECTION 3 CONFIGURATION

Field or Button	Description
Network Name	Enter a Network Name (SSID) of no more than
(SSID)	32 alphanumeric characters. This SSID must be
	entered on every wireless device on your
	wireless network to communicate with the
	router. The default SSID is “motorola XXX”,
	where XXX are the last 3 characters of your
	Wireless MAC address, found on the label on
	the bottom of the unit.
Channel Number	Identifies the channel on which the router
	communicates. Each wireless client must use
	the same channel to enable communication.
	This can only be altered from a PC that is wired
	directly to the router, not wirelessly.
	The default is Channel 11.
Operation Mode	Enables you to select the type of transmission
	protocol your wireless network uses. The
	default is 802.11b/g
	The options are:
	!	Compatibility (802.11b/g)
	!	Performance (802.11g only)
	!	Legacy (802.11b only)
Wireless MAC	Displays the Wireless MAC address of the unit.
Address	This is different that the WAN MAC address.

3-10 SECTION 3, CONFIGURATION