Canon 600EX, 600EX-RT, Speedlite 600 EX-RT ALL (_) →, 5 Take the picture, A/B (%) → A/B/C (]), 4 Set the flash output, 3 Select a firing group, Set the flash mode to <q

q: Wireless Multiple Flash Shooting with Manual Flash Output

This describes wireless (multiple flash) shooting using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit.

1

2

Set the flash mode to <q>.

Set the number of firing groups.While <M> is displayed, press function button 2 <T> and set the groups to fire.The setting changes as follows each time you press the button:ALL (_) →A/B (%) → A/B/C (]).

3 Select a firing group.

Press function button 3 <F>, turn <9> and select the group for which you want to set the flash output.

4 Set the flash output.

Press function button 3 <1>. Turn <9> to set the flash output, and press the <8> button.

Repeat steps 3 and 4 to set the flash output of all groups.

5 Take the picture.

X Each group fires at the set flash ratio.

When ALL <_> is set, set A, B or C as the firing group for the slave units. The flash will not fire if it is set to D or E.

To fire multiple slave units with the same flash output, select ALL <_> in step 2.

64