C: Setting Custom Functions

C.Fn-12: 3(Flash recycle with external power)0: 1(External & internal power)Charges in parallel using both internal power and external power.1:2(External power only)

Internal power is needed to control the Speedlite. By using only external power for charging, you can minimize the depletion of the internal power.

C.Fn-13: 6(Flash exposure metering setting)0:4(Speedlite button and dial)1:5(Speedlite dial only)

You can perform flash exposure compensation by directly turning <9>, without pressing the <@> button.

C.Fn-20: 7(Beep)

You can enable a beep to sound when the Speedlite is fully charged, or when a slave unit is fully charged during radio wireless transmission flash shooting.

Note that when set to 1, a beep will sound as a warning when the flash firing restriction is activated due to a temperature increase in the flash head.

0:OFF (Disabled)

1:ON (Enabled)

99