Canon T50 manual Loading the Film

7. Loading the Film

Pull up the rewind knob until the back cover pops open.

The T50 uses color or black and white film (negative or slide) in standard 35 mm cartridges. Place the cartridge in the film chamber as shown. Then push the rewind knob down, turning it until it drops into its normal posi- tion.

Pull the film leader across the camera so that its tip is aligned with the orange index in the lower right-hand side of the film chamber. If the film leader ex- tends past the orange line, manually wind the excess film back into the film cartridge. Make sure the film perforations are engaged with the sprocket teeth, then close the back cover.

Too much film slack.

13

Shield the film from direct sunlight while loading it.

Distributed by WWW.LENSINC.NET