4Press PAUSE to begin dubbing.

• Audio device: Begin playback.

•Microphone: Speak into the microphone.

5Press STOP to stop dubbing.

Audio device: Stop playback.

IMPORTANT

Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or

[ 16bit] audio.

You cannot use the DV terminal for audio dubbing.

The quality of the dubbed sound will not be as good when dubbing audio to a tape that was not recorded with this camcorder or after having dubbed audio over the same scene more than 3 times.

NOTES

While dubbing audio using the built-in microphone: You can connect the camcorder to a TV to check the picture on the TV screen and check the sound through headphones connected to the TV.

While dubbing audio using an external audio device: You can check the picture on the camcorder's LCD screen and the sound through the built-in speaker or the audio device.

TO SELECT THE AUDIO TRACK FOR PLAYBACK

You can select the audio track that will be played when playing back a tape that was audio dubbed ( 51).

Connecting to a TV or VCR 67

Connections External