72Connecting to a Printer 
FUNC. | CARD OPERATIONS |
TRANSFER ORDER
Bring (
, 
) the cursor
to the image you want to
FUNC. ** transfer and press ( 
).* Repeat this step to set
transfer orders for additional images.
* 
appears on images marked with a transfer order. Press ( 
) to cancel the transfer order.
**After closing the menu the camcorder returns to the index screen.
Erasing All Transfer Orders
(
10)
FUNC.
FUNC. 
MENU
CARD OPERATIONS
TRANS.ORD.ALL ERASE
FUNC. 
YES
Connecting to a Printer
Printing Still Images – Direct Print
The camcorder can be connected to any PictBridge compatible printer. You can mark the still images you want to print and set the desired number of copies as a print order
(
75).
Canon printers: SELPHY CP and SELPHY DS printers and PIXMA printers marked with the PictBridge logo.
Connecting the Camcorder to the Printer
(
10)
1Insert the memory card containing the still images you want to print.
2Turn on the printer.
3Connect the camcorder to the printer using the USB connection
68)– shown in the previous section PC Connection Diagrams.
appears and changes to 
.
IMPORTANT
If 
continues to flash (for more than 1 minute) or if 
does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to 
mode and restore the connection.
NOTES
will appear for images that cannot be printed.
We recommend powering the camcorder using the compact power adapter.
Refer also to the printer’s instruction manual.