32Playback

NOTES

When you wake up the camcorder from Quick Start mode, the following settings will be changed automatically.

-Manual focus returns to automatic focus (AF).

-Manual exposure adjustment returns to automatic exposure.

-Zoom position returns to full wide angle W.

In Quick-Start ready mode, the camcorder consumes only half the power used while recording. Using this mode you can save energy when using a battery pack.

While the camcorder is in Quick-Start ready mode (QUICK START button lit up):

-If you change the position of the / switch, the camcorder will shut off. To restore the power, turn the camcorder off and then on again.

-The camcorder will shut off if left in the Quick- Start ready mode for 30 minutes, regardless of

the [POWER SAVE] setting ( 43). To restore the power, turn the camcorder off and then on again.

-If you open the cassette compartment cover, the camcorder will return to record pause mode.

Playback

Playing Back Movies

Play back the tape on the LCD display or close the LCD panel to use the viewfinder. You can also turn the LCD panel and close it with the screen facing out.

( 10)

1Holding the lock button pressed

down, set the switch to PLAY.

2Move the / switch to (tape).

3If the joystick guide does not

appear on screen, press ( ) to display it.

4Locate the point where you want to begin the playback.

Push the joystick () towards to rewind the tape or () towards to fast forward.