Canon zr830, zr850 manual 82

82	Trouble?
	Message	Explanation/Solution
LOW INK LEVEL		The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
		printing.
INK ABSORBER FULL		Select [CONTINUE] to resume printing. Contact a Canon Service Center
		(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR		You attempted to print an image that was recorded with another
• CANNOT PRINT!		camcorder, with a different compression, or was edited on a computer.
SET	PRINT ORDER	No still image on the memory card has been marked with a print order.
PRINTER ERROR		Cancel printing. Turn the printer off and then on again. Check the printer
		status. If the error still persists, refer to the printer’s instruction manual and
		contact the appropriate customer support center or service center.
PRINT ERROR		Cancel printing, disconnect the USB cable and turn off the printer. After a
		while, turn the printer back on and reconnect the USB cable. Check the
		printer status.
HARDWARE ERROR		Cancel printing. Turn off the printer and turn it back on. Check the printer
		status. If the printer is equipped with a battery, it might be exhausted. In
		such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION		The printer is experiencing a data transfer error. Cancel printing.
ERROR		Disconnect the USB cable and turn off the camcorder and the printer. After
		a short while, turn them on again, set the camcorder to	mode
		and restore the connection. If you attempted to print from a memory card
		that contains a large number of images, reduce the number of images.
PRINTER IN USE		The printer is in use. Check the printer status.
PAPER LEVER ERROR		Paper lever error occurred. Adjust the paper selection lever to the proper
		position.
PRINTER COVER OPEN		Close the printer cover securely.
NO PRINTHEAD		No print head is installed in the printer or the print head is defective.