USING THE SELF-CLEANING CYCLE
Setting the controls
Make sure the clock is set to the correct time of day. (See “Setting the clock” on page 13.)
To start the Self-Cleaning cycle now:
1.Press the Clean pad. The display will show
2.To set the cleaning time, press the Increase or Decrease pad until the desired cleaning time shows on the display. You can set the cleaning time anywhere between 2 and 4 hours.
•Use 2 hours for light soil.
•Use
3.Once you have set the cleaning time ON will appear on the display. The Self- Cleaning cycle will begin automatically within a few seconds.
To delay the start of
1.Press the Clean pad. The display will show
2.To set the cleaning time, press the Increase or Decrease pad until the desired cleaning time shows on the display. You can set the cleaning time anywhere between 2 and 4 hours.
•Use 2 hours for light soil.
•Use
CLEAN
CLEAN
26