Whirlpool RS386PXE Using the off/cancel pad, Audible signals, To reset the Minute Timer

Models: RS386PXE

1 36
Download 36 pages 27.56 Kb
Page 14
Image 14
To reset the Minute Timer:

USING YOUR RANGE

After the countdown is over, three short tones will sound, followed by one tone that sounds every 6 seconds until you press any other command pad.

To reset the Minute Timer:

Repeat Steps 1 and 2 on page 13.

To cancel the Minute Timer:

Press Timer On/Off pad until TIMER stops

flashing on the display (about 4 seconds).TIMER

ON/OFF

Using the off/cancel pad

The Off/Cancel pad will cancel any function except for the Clock and Timer functions. When you press the Off/Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.

OFF

CANCEL

Audible signals

Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.

To shut off repeating end-of-timer countdown signal:

1.Press and hold the Off/Cancel pad for 10 seconds.

2.A short tone will sound to tell you the signal has been changed.

Repeat the above steps to turn the signal back on.

14

Page 14
Image 14
Whirlpool RS386PXE Using the off/cancel pad, Audible signals, To reset the Minute Timer, To cancel the Minute Timer