Operations
English
Operations
Screen Size Selection
This unit incorporates screen modes of various height and width ratios. For optimal viewing, we recommend that you select the screen mode that best matches the video source that you are viewing. Although these modes are designed for full display of a picture on a wide screen, it is our hope that you make use of them with a full understanding of the manufacturer’s intentions.
Changing the screen size
The size of the picture or the picture’s range projected on the screen can be changed between 4 screen sizes described in the table on this page.
Press SCREEN SIZE to select the size.
The screen size changes each time SCREEN SIZE is pressed as follows.
| 3 DOT BY DOT | 3 4:3 |
| ||||
|
| ||||||
|
| PARTIAL 2 |
|
|
|
|
|
|
|
|
| FULL 2 |
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Consult the table Computer Signal Formats Supported (page 31) for information regarding screen sizes supported by each signal format.
Notes
÷When the PARTIAL or FULL setting is used to display a non- wide screen 4:3 picture fully on a wide screen, a portion of the picture may be cut off or appear deformed.
÷Be aware that when the display is used for commercial or public viewing purposes, selecting the PARTIAL or FULL mode settings may violate the rights of authors protected under copyright law.
÷When DOT BY DOT or 4:3 screen sizes are selected, the display position is moved slightly each time the power is turned on, in order to prevent image burning.
Moving the screen position upward or downward
During personal computer input (1280 x 1024/60Hz only), even when the PARTIAL setting is selected, the position of the screen can be adjusted by using 5/∞. The adjustment value will not, however, be stored in memory.
18
During personal computer signal input
1DOT BY DOT
The input signal and the screen maintain a dot to line ratio of 1:1 and is thus highly faithful to the source.
|
|
|
|
|
|
|
|
|
|
|
|
| A |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 480 lines |
|
|
| ||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 768 lines | |||
|
|
|
|
|
|
|
|
|
|
|
|
640 dots 
1280 dots
(Illustration shows 640 x 480 input.)
24:3
The display fills the screen as much as possible without altering the aspect ratio of the input signal.
A 
3FULL
The display is presented with a widescreen aspect ratio of 16:9 and fills the entire screen.
A
4PARTIAL
The PARTIAL setting is available only during personal computer input (1280 x 1024/60 Hz only).
The input signal and the screen maintain a dot to line ratio of 1:1. Display is highly faithful to the source. However, in order to maintain the 1:1 ratio, a portion of the display will not appear on the screen.
768 lines
1024 lines
Use 5/∞ to adjust the position of the video image on the screen.
En
