Hitachi CMP5000WXJ, CMP5000WXU user manual Partial Image Enlargement

Operations

Partial Image Enlargement

(POINT ZOOM)

This display allows any one of nine screen areas (AREA 1 to AREA 9) to be selected and enlarged to x1.5, x2, x3, or x4. When performing point zoom enlargement, the direction buttons (5/∞/2/3) can be used to move the enlarged portion up-down and right-left.

1Press the remote control unit’s POINT ZOOM.

P.ZOOM EXIT

SELECT SET ZOOM

3Press SET to select the zoom ratio.

Pressing SET repeatedly changes the zoom ratio in the following order:

3 x 1.5	3 x 2.0
x 4.0 2	x 3.0 2

÷When the zoom ratio is changed, the screen image is enlarged based on the screen center.

÷5/∞/2/3 can be used to move the enlarged portion up-down and right-left.

÷If no operation is undertaken for three seconds or more, the display screen will disappear.

SET or 5/∞/2/3 can be pressed again if desired to change the zoom ratio or display position.

4Press the remote control unit’s POINT ZOOM once again to cancel the point zoom operation.

The point zoom function will also be canceled whenever the input signal changes, the menu screen is displayed, or the INPUT changes.

English

					Note
2 Press 5/∞/2/3 as required to select the desired					Whenever point zoom is selected, the screen size automatically
					changes to FULL.
screen area (AREA 1 to AREA 9).
AREA 1 display range			AREA 2 display range				AREA 3 display range
	AREA 1			AREA 2					AREA 3
	x 4.0	x 3.0		x 4.0		x 3.0		x 3.0	x 4.0
x 2.0			x 2.0					x 2.0
	x 1.5			x 1.5					x 1.5

Operations

AREA 4 display range

AREA 4
x 4.0	x 3.0

x2.0

x1.5

AREA 7 display range

AREA 7
x 4.0	x 3.0

x2.0

x1.5

AREA 5 display range AREA 6 display range

AREA 5			AREA 6
x 4.0	x 3.0	x 3.0	x 4.0
x 2.0			x 2.0
x 1.5			x 1.5

AREA 8 display range AREA 9 display range

AREA 8			AREA 9
x 4.0	x 3.0	x 3.0	x 4.0
x 2.0			x 2.0
x 1.5			x 1.5

19

En