Installation and Connections
English
Installation of the Unit
Installation using the optional HITACHI stand or installation bracket
÷Please be sure to request installation or mounting of this unit or the installation bracket by an installation specialist or the dealer where purchased.
÷When installing, be sure to use the bolts provided with the stand or installation bracket.
÷For details concerning installation, please refer to the instruction manual provided with the stand or installation bracket.
Installation using accessories other than the HITACHI stand or installation bracket (sold separately)
÷When possible, please install using parts and accessories manufactured by HITACHI. HITACHI will not be held responsible for accident or damage caused by the use of parts and accessories manufactured by other companies.
÷For custom installation, please consult the dealer where the unit was purchased, or a qualified installer.
Wall-mount installation of the unit
This unit has been designed with bolt holes for
÷Be sure to attach in 4 or more locations above and below, left and right of the center line.
÷Use bolts that are long enough to be inserted 1/2 inch (12 mm) to 11/16 inch (18 mm) into the main unit from the attaching surface for both a holes and b holes.
Refer to the side view diagram below.
÷As this unit is constructed with glass, be sure to install it on a flat, unwarped surface.
|
|
| Air vents (fan) |
|
| |
|
| b hole | b hole |
|
| |
Connections |
|
|
|
| Attaching surface | |
|
|
|
| Installation | ||
|
|
|
|
| ||
|
|
|
|
| bracket, etc.. | |
|
|
|
| Main unit | a hole | |
|
|
|
|
| ||
and |
|
|
| Center line | Bolt | |
b hole | a hole | a hole | b hole | |||
| ||||||
Installation |
| |||||
|
|
|
| 11/16 inches (18 mm) | ||
|
|
|
|
| 1/2 inches (12 mm) to | |
|
|
|
|
| Bolt | |
|
|
|
| b hole | ||
b hole | Center line | b hole | 1/2 inch (12 mm) to |
| |||
|
|
| |
|
|
| 11/16 inch (18 mm) |
Rear view diagram
CAUTION
To avoid malfunction, overheating of this unit, and possible fire hazard, make sure that the vents on the main unit are not blocked when installing. Also, as hot air is expelled from the air vents, be careful of deterioration and dirt build up on rear surface wall, etc..
CAUTION
Please be sure to use an M8 (Pitch = 1.25 mm) bolt. (Only this size bolt can be used.)
8
Side view diagram
CAUTION
Because this unit weighs about 88 lbs 3 oz (about 40 kg) and the lack of depth makes it fairly unstable, please use 2 people or more when packing, carrying or installing.
CAUTION
This unit incorporates a thin design. To ensure safety if vibrated or shaken, please be sure to take measures to prevent the unit from tipping over.
En
