USE OF YOUR OVEN
INITIAL OVEN SETUP
CLOCK
•When powered up and prior to pressing any buttons the clock will flash 12:00 and will increase each minute.
•To set the oven clock press the CLOCK button on the control panel once.
•The clock will blink indicating it is ready to be set and the AM or PM icon will be displayed.
•Set the correct time by rotating the TEMP/TIME knob on the right side of the control panel clockwise to increase the time and counter clockwise to decrease the time.
•Once the present time has been selected, press the START button to set the time.
•A 12 hour clock display is the default but may be changed.
•If a 24 hour military type clock display is desired, press and hold the CLOCK button for 6 seconds. “12 hr” or “24 hr” will be displayed and can be toggled by pressing the TIME/TEMP knob. Press START to select the desired display type.
•Note: AM or PM will only be displayed during the setting of the clock.
FAHRENHEIT OR CELSIUS TEMPERATURE DISPLAY
•Temperature is displayed in Fahrenheit as a default but may be changed to Celsius if desired.
•To change the temperature readout to degrees Celsius select the BROIL mode and set it to HIGH.
•Start the mode and press and hold the TIME/TEMP button for 6 seconds. “F” (Fahrenheit) will be displayed as the current mode as a factory default. It can be toggled to “C” (Celsius) by pressing the TEMP/TIME knob. Press START to select the desired mode.
CONTROL BEEPER
•An audio beeper is used to indicate presses of the control, indicate alarm expiration, end of cycles, etc.
•The beeper may be disabled if desired.
•To disable the beeper, press and hold the DELAY COOK button for 6 seconds. “On” or “Off” will be displayed (On is the default). The state of the beeper can be toggled by pressing the TEMP/TIME knob.
•Press START to select.
OVEN LIGHTS
•Oven lights may be turned On and Off by pressing the LIGHT button on the control panel.
•In a double oven both the upper and lower oven lights will be turned On and Off when the LIGHT button is pressed.
9
