Carrier 17EX Table 15 17EX Heat Exchanger Economizer/Storage Vessel, Piping, and Pumpout Unit Weights*, Table 16 Additional Cooler Weights*, Fig. 56 Model Number Nomenclature for Compressor Size (See Fig. 1 Also)

Table 15 — 17EX Heat Exchanger Economizer/Storage Vessel, Piping, and Pumpout Unit Weights*

COOLER

SIZE†

COOLER

TOTAL

WEIGHT

COOLER

CHARGE

ECONOMIZER/

STORAGE

VESSEL

ECONOMIZER

REFRIGERANT MISCELLANEOUS

PIPING PUMPOUT

UNIT

Dry** Operating†† Refrigerant Water lb kg lb kg lb kg lb kg

lb kg lb kg lb kg lb gal kg L

45 25,032 11 355 30,098 13 652 2,060 934 3,006 361 1 364 1366

7,900 3 583 840 318 1,149 521 210 95

46 25,529 11 580 30,881 14 008 2,160 980 3,192 383 1 448 1450

47 26,025 11 805 31,663 14 362 2,260 1 025 3,378 405 1 532 1533

48 28,153 12 770 34,866 15 815 2,540 1 152 4,173 500 1 893 1893

CONDENSER

SIZE†

CONDENSER TOTAL WEIGHT CONDENSER CHARGE

Dry** Operating†† Refrigerant Water

lb kg lb kg lb kg lb kg

45 16,676 7 564 20,596 9 342 1,200 544 2,720 1 234

46 17,172 7 789 21,280 9 653 1,200 544 2,908 1 319

47 17,669 8 015 21,965 9 963 1,200 544 3,096 1 404

55 20,725 9 401 25,598 11 611 1,420 644 3,453 1 566

56 21,663 9 826 26,891 12 198 1,420 644 3,808 1 727

57 22,446 10 182 27,971 12 688 1,420 644 4,105 1 862

*If a chiller conﬁguration other than 2-pass, 150 psig (1034 kPa), NIH waterbox

conﬁguration is used, refer to Tables 16 and 17 to obtain the additional dry and

water weights that must be added to the values shown in this table.

†Cooler and condenser weights shown are based on 2-pass, nozzle-in-head

(NIH) waterboxes with 150 psig (1034 kPa) covers. Includes components at-

tached to cooler, but does not include suction/discharge, elbow, or other

interconnecting piping.

**Dry weight includes all components attached to economizer: covers, ﬂoat valves,

brackets, control center (31 lb [14 kg]), and power panel (20 lb [9 kg]). Dry

weight does not include compressor weight, motor weight, or pumpout con-

densing unit weight. The pumpout condensing unit weight is 210 lb (95 kg).

For compressor and motor weights, refer to Tables 18 and 20A and 20B.

††Operating weight includes dry weight, refrigerant weight, and water weight.

Table 16 — Additional Cooler Weights*

COOLER

FRAME WATERBOX

TYPE NUMBER

OF PASSES

DESIGN MAXIMUM

WATER PRESSURE ADDITIONAL

DRY WEIGHT ADDITIONAL

WATER WEIGHT

psig kPa lb kg lb gal kg L

NIH 1, 3 150 1034 515 234 — — — —

NIH 1, 3 300 2068 2941 1334 — — — —

NIH 2 300 2068 2085 946 — — — —

Marine 1, 3 150 1034 2100 953 5102 612 2314 2314

Marine 2 150 1034 792 359 2551 306 1157 1157

Marine 1, 3 300 2068 3844 1744 5102 612 2314 2314

Marine 2 300 2068 2536 1150 2551 306 1157 1157

*When using a chiller conﬁguration other than 2-pass, NIH waterboxes with 150 psig (1038 kPa) covers, add the weighs listed in this table to the

appropriate weights in Table 15 to obtain the correct cooler weight.

Fig. 56 — Model Number Nomenclature for Compressor Size (See Fig. 1 Also)

100