<Controller Name>
CONFIG
SETPOINTS
SCHEDULES
ALARM HIST
ATTACH
DETACH
<Text & Error messages>
<Controller Name>
SETPOINTS
ALARM HIST
ATTACH
DETACH
<Text & Error messages>
Ctrl-→IDFig. 6 — Program Screens
<Controller Name>
ALARM HIST
ATTACH
DETACH
<Text & Error messages>
Fig. 7 — Attach Screen
(System Pilot on Carrier Communicating Network)
→
The center portion of the screen shows the following infor- mation for the controller to which the System Pilot is currently attached. The controller name, device description, software part number, reference number, element number, bus number and baud rate are shown. The device description and reference number will be truncated, if necessary, to fit on the screen. The controller name, device description, address and baud rate are modifiable from security level 1 only.
→ALARM HIST — Selecting the ALARM HIST option from the Program screen displays the Alarm History screen. See Fig. 10. This screen shows the most recent alarms and alerts generated by the attached device and stored in its Alarm History table.
The top line shows the
Use the SCROLL UP/DOWN or PAGE UP/DOWN but- tons or the NAVIGATE knob to scroll through the alarms/alerts one at a time. If the EXIT button is pressed, the System Pilot will return to the Program screen.
Fig. 8 — Attach Screen
(System Pilot on Local Bus)
Fig. 10 — Alarm History Screen
| Fig. 9 — Controller ID Screen |
606 | 4 |
|