Chassis Overview, Front, Back | Carrier Access 3200 instruction

Quick Start

Chassis Overview

Chassis Overview

Front

Alarm

Status


					(1) DS1/E1 (WAN)
	(4) 10/100Base-T Reset				(1) DS1/E1 (WAN)
	(4) 10/100Base-T Reset				(E1-future)
	Ethernet (LAN)
	Ethernet (LAN)			(1) 10/100Base-T
				(1) 10/100Base-T
				Ethernet (WAN)

Back

		Power/Battery/Status		RS-		232

Ground
				Management
				Port

Adit 3200 - Release 1.6

11

Image 11

Carrier Access 3200 quick start Chassis Overview, Front, Back

Contents

Adit Page Quick Start Guide Unpacking and Inspection Electrostatic Discharge ESD PrecautionsInstallation Environment Installation User Safety Compliant Installation Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional Feature Tray Slide Adit 3104, 3200, 3300 and 3400 Battery Backup Back Chassis OverviewFront Grounding the Unit Interface ConnectorsFront of Adit Back of Adit To connect -48 VDC power PowerBattery Connection To connect AC power Direction Description RS-232 Craft Port Female DB-9 State Description DS1/E1 Connection PortsPin Name Description 10/100Base-TX Ethernet Reset Button Alarm/Status LEDs #show interface ethernet 2 Eth WAN To access the management consoleCommand Description Web-Based Management Set the New-line/Transmit value CR+LF Setting up a CLI Connection Log Adit 3200 show version Key Enabled Software Features Setup Adit 3200 for access via Web-Browser Basic Configuration Select Restore Defaults Restore Factory Defaults Modify Default Admin User Quick Start Web-browser Configure Ethernet WAN Interface Select Apply to apply the new settings Set Network to WAN Configure Serial 1 as WAN