Select Apply to apply the new settings | Carrier Access 3200

Quick Start

Basic Configuration

6.Set Internet Protocol to Obtain an IP Address Automatically, from the pulldown menu. This will enable the Adit 3200 as a DHCP Client. Leave the other fields to their default settings.

7. Select Apply to apply the new settings.

Adit 3200 - Release 1.6

27

Image 27

Carrier Access 3200 quick start Select Apply to apply the new settings

Contents

Adit Page Quick Start Guide Electrostatic Discharge ESD Precautions Installation EnvironmentUnpacking and Inspection Installation User Safety Compliant Installation Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional Feature Tray Slide Adit 3104, 3200, 3300 and 3400 Battery Backup Chassis Overview FrontBack Grounding the Unit Interface ConnectorsFront of Adit Back of Adit To connect -48 VDC power PowerBattery Connection To connect AC power Direction Description RS-232 Craft Port Female DB-9 DS1/E1 Connection Ports Pin Name DescriptionState Description 10/100Base-TX Ethernet Reset Button Alarm/Status LEDs #show interface ethernet 2 Eth WAN To access the management consoleCommand Description Web-Based Management Set the New-line/Transmit value CR+LF Setting up a CLI Connection Log Adit 3200 show version Key Enabled Software Features Setup Adit 3200 for access via Web-Browser Basic Configuration Select Restore Defaults Restore Factory Defaults Modify Default Admin User Quick Start Web-browser Configure Ethernet WAN Interface Select Apply to apply the new settings Set Network to WAN Configure Serial 1 as WAN