HANGINGTHE FAN
Step 5. To hang the fan body in the canopy, hold the fan body firmly and insert the nylon ball into the canopy open- ing. Rotate fan body until slot on nylon ball fits into pin opposite canopy opening.
NOTE: The fan weight is 37.5 pounds.
BALL
CANOPY
SLOT | PIN |
|
|
|
|
BLACK |
|
|
| WHITE | 120V AC |
| GREEN |
|
| BLACK & |
|
| YELLOW |
|
YELLOW | RED | GROUND |
| 2 WHITE | |
|
| |
| RED AND |
|
| BLUE |
|
| 3 GREEN |
|
| WIRE NUT |
|
BLACK |
|
|
•The fan must be supplied with three independent 120V AC supply wires to provide power for the fan, the light, and neutral.
•The fan may be turned ON and OFF by the
•The lights may be turned ON and OFF by the
Installation is to be in accordance with the National Electrical Code, ANSI/NFPA
Step 6a. Connect the fan wires to the outlet box wiring by placing the bare ends of the wires together and then securing with a wire nut.
Connect in this order:
•GREEN leads from mounting plate and fan to GREEN GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to WHITE NEUTRAL wire in ceil- ing fixture outlet box. Secure with wire nut.
•BLACK wire from fan to YELLOW wire in ceiling fixture outlet box. Secure with wire nut.
•BLUE
Inspect each wire nut and ensure that no bare wire is vis- ible; pull on each wire to test the connection is mechanically sound.
6