| BLADE HARDWARE | ||
BLADE TIP SCREW |
|
| BLADE SCREW |
(2 PER BLADE) | BLADE TIP | BLADE ROD | (3 PER BLADE) |
|
|
BLADE
INSTALL BLADE RODS
Step 10. Remove the shipping cover from each of the blade rod holders on the fan body.
Using the provided Allen wrench, unscrew the blade rod holder screw a few turns to assure proper installation of the blade rod. Insert the metal end of the blade rod (NOT the
SHIPPING
COVER
BLADE ROD
HOLDER SCREW
BLADE ROD
Note: Do NOT install the rub-
BLADETIP INSTALLATION
Step 11. Attach the blade tips to the blades using the blade tip screws provided. Using the screwdriver, tighten securely by hand only.
CAUTION:
Do not overtighten screws.
BLADE INSTALLATION
Step 12. Insert the blade into the opening on the side of the fan.
Then insert the
Next, push the blade rod into the blade tip until it is tight.
Attach the blades to the interior of the fan body using the blade screws provided. Using the screwdriver, tighten securely by hand only.
BLADE TIP
BLADE ROD
Note: Be very careful not to push the blade too far into the fan as you may scratch the blade.
BLADE
BLADE
SCREWS
8